Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta

Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta

$90

Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta

Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta:whilst also offering the best possible advice through our specialist trained sales team who collectively have over 100 years experience. I ran this 22l through the wringer and it came out still cleaning and heating. I had the intention of running this thing violently til it broke, burned up, stopped working, died, destroyed, worst case scenario or any other thing the negative reviews had to say. The parts were dirty, greasy, oily, full of rust and heavy cruddy deposits for just a run through hell. I've run the ultrasonic powder from Harbor Freight, a phosphoric acid, sulfuric acid, the gallon of POR-15 Rust Remover (diluted 2:1), muriatic acid, metal etching acid, heated distilled water with Power Purple and just about everything else you're not supposed to use in it. What I cleaned: 4 dirtbikes were taken apart, engine cases, cylinder, cylinder heads, caked with dirt, rusted bolts/nuts, bearings of every type (wheel, full swingarm 1/2 at a time, swingarm linkage, etc) F/R brake calipers, rear shocks, cables, clutch baskets, carburetors, triple trees. Garden tractor parts: carbs, calipers, cylinders, heads, valves, springs, keepers, pushrods, rockers, crankshafts, cams, spindles, cutting blades (Caked with heavy grass), pulleys, springs, Three K51-K66 transmission case halves Six total, axles, hubs, front steering spindles (full grease covered) and connecting linkages..... The list goes on, if it fit it went in. The keys to keeping it working well is keep it 2/3rd full, when you remove the top have a rag to wipe the rim because the heater will create condensation/steam droplets and they will run down the side, if not used for more than a few days have a container to remove cleaner fluid from tank.I cleaned the tank/machine after changing chemicals, the worst was the dirt bikes, the dirt and grease was 3/4" sludge on the bottom clogging the drain hole so I had to scoop it out and then rinse with hot water and Dawn dishsoap. Even with all that crud on the bottom parts still came out clean but had to be rinsed with the hose of the dirty water.max 87% off,max 88% off,new york mallAnbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta
|||

Product Description

Anbull Ultrasonic Cleaner

11

DESCRIBE:

Function and principle:

  • Mainly through the transducer, the sound energy of the power ultrasonic frequency source is converted into mechanical vibration, and the ultrasonic wave is radiated to the cleaning liquid in the tank through the cleaning tank wall. Due to the ultrasonic radiation, the microbubbles in the liquid in the tank can maintain vibration under the action of sound waves. Destroy the adsorption of the dirt and the surface of the cleaning part, cause the fatigue damage of the dirt layer and be dismissed, and the vibration of the gas bubble scrubs the solid surface.

Attention:

  • The following accessories are also included in the 6.5L/10L/15L/22L/30L Ultrasonic Cleaner: 1× 39.4’’Water Pipe, 1× PTFE, 1× Drainage Filter Iron Sheet, 1× Drainage Outlet Joint, 1× Water Pipe Fixing Iron Ring.(Except for 4.5LUltrasonic Cleaner)
"div"
SPGA019"noscript"SPGA019

Insulated handle

    "li"The comfortable handle can assist the operator to easily move the ultrasonic cleaner to any place. "li"The insulated handle is anti-conductive, so that the person holding the insulated handle will not get an electric shock after the metal part contacts the live line. Can protect personal safety.
SPGA019"noscript"SPGA019

3D radiator

After the ultrasonic cleaner works for a long time, it will dissipate heat by itself through the 3D radiator to prevent damage to the body due to excessive temperature.

SPGA019"noscript"SPGA019

Silicone base feet

The corner posts made of soft silica gel strengthen the friction between the ultrasonic cleaner and the ground and make the fuselage more stable when working.

SPGA019"noscript"SPGA019

Drain valve

After use, the waste water can be easily discharged from here, and the operation is simple, saving time and effort.

SPGA019"noscript"SPGA019
"p" Insulated handle

SPGA019"noscript"SPGA019
"p" 3D radiator

SPGA019"noscript"SPGA019
"p" Silicone base feet

SPGA019"noscript"SPGA019
"p" Drain valve

"div"
"tbody" "th" 4.5L (1.2Gal) "th" 6.5L (1.7Gal) "th" 10L (2.6Gal) "th" 15L (4Gal) "th" 22L (5.8Gal) "th" 30L (8Gal)
11 111 1111 12 2 3
Material 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel
Transducer's quantity (vibrators) 3 3 4 6 8 10
Ultrasonic power 180W 180W 240W 360W 480W 600W
Heating Power 150W 150W 200W 300W 500W 500W
Tank Size 300×150×100mm/11.8×6×4inch 300×150×150mm/11.8×6×6inch 300×240×150mm/11.8×9.4×6inch 330×300×150mm/13×11.8×6inch 500×300×200mm/19.7×11.8×7.9inch 500×300×200mm/19.7×11.8×7.9inch
Product Dimension 325×180×225mm/12.8×7.1×8.9inch 325×180×280mm/12.8×7.1×11inch 325×265×280mm/12.8×10.4×11inch 328×325×285mm/12.8×12.8×11.2inch 530×325×285mm/20.9×12.8×11.2inch 530×325×325mm/20.9×12.8×12.8inch
Ultrasonic Frequency 40KHz 40KHz 40KHz 40KHz 40KHz 40KHz
Drainage Tap ✓ ✓ ✓ ✓ ✓ ✓
Cleaning Basket amp; Spherical filter ✓ ✓ ✓ ✓ ✓ ✓
1M water pipe and other accessories × ✓ ✓ ✓ ✓ ✓

APPLICATION:

333333

Application field and range:

  1. 1. Machinery industry: dredge cleaning of mechanical parts, engines, carburetor and auto parts, filters, filter screens, etc. It is especially suitable for the degreasing, degreasing, rust prevention, and dust removal of various parts of railways, train compartment air conditioners, and locomotives.
  2. Surface treatment industry: degreasing and rust removal before electroplating, cleaning before ion plating, phosphating treatment, removal of carbon deposits, removal of oxide scale, removal of polishing paste, surface activation treatment of metal workpieces, etc.
  3. Instrument and meter industry: high-level cleaning before assembly of precision parts, etc.
  4. Electronic industry: the printed circuit board removes rosin, solder spots, high-voltage contacts, etc.
  5. Medical industry: cleaning, disinfection and sterilization of medical equipment, laboratory utensils, dentures, etc.
  6. Semiconductor industry: high cleanliness of semiconductor wafers.
  7. Watch and jewelry industry: cleaning oil, dust, oxide layer, polishing paste, etc.
  8. Chemical and biological industries: laboratory utensils cleaning and descaling.
  9. Optical industry: degreasing, sweating and dust removal of optical devices.
  10. Textile printing and dyeing industry: cleaning textile spindles, spinnerets, etc.
  11. Petrochemical industry: cleaning and dredging of metal filter screens, cleaning of chemical containers, exchangers, etc.
  12. Others: liquid defoaming (removing dissolved air) in photosensitive material manufacturing, papermaking, and certain food fields.
Southern Couture SC Classic Paisley The Elephant on Longsleeve WBaby Boys Girls Fall Winter Caratoon Animal Fox Ears PP Pants LeYoudiao Women Lightweight Sweater Striped Color Block OversizedComfortable Printed mask,Mexican Blanket Stripes for Cinco De MaCiNily Fire Opal Promise Rings for her Women Jewelry Rhodium PlaDermactin-TS Peel Off Facial Mask, Pore Refine and Charcoal, 2 OPASS SEYMOUR TP8IBPCC5 Ivy 1G DPLX Wall PlateSYJ High Back Twill Jacquard Stretch 2/4/6 Pack XL Chair Covers
Womens Underwear Cotton Seamless Stretch Briefs Breathable Soft
Large Om Scarf Wrap Yoga Soft Cotton Mix Hand Printed Mantra Pra
Doublju Womens Casual Work Ruched 3/4 Sleeve Open Front Blazer J
Fender Modern Pickguard, Precision Bass, 13-Hole - Tortoise Shel
Kendra Scott Ari Heart Stud Earrings for Women, Fashion Jewelry
Black and White Buffalo Plaid Umbrella Hole Tablecloth for Outdo
MISS MOLY Women Seamless Upper Arm Shaper Compression Vest Back
Arena Powerskin ST 2.0 Men's Jammers Racing Swimsuit
Kodycity Black Lives Matter Pin Brooch Pins for Women Men 1 InchNewborn Baby Girl Clothes Floral Shorts Set Ruffle Sleeve RomperCTA Tools A340 Heavy-Duty Battery Clamp Set, 2 PieceProthane 6-1163 Red 18 mm Rear Sway Bar Bushing Kit with End LinSAFAVIEH Hudson Shag Collection SGH283D Moroccan Trellis Non-SheLivebest Ultra Lightweight Aluminum Folding Step Stool 2 Step LaSUMGAR Custom 3D Wallpaper Living Room Large Space White Wall MuMen Silk Durag Long Straps Bandanas for Men Headwear Waves Cap
SEAFLO 4" Electric In-Line Marine Bilge Air Blower 12V 270 CFM 4
Nike Men's Footbal Shoes
Castelli Brillante Sock
OIIKI 5 Packs 7/32 inch Metal Hex Dogging Key for Push Bar Panic
French Toast Boys' Long Sleeve Crewneck Tee T-Shirt
Air Lift 1000 60909 Universal Air Suspension Kit
NERANENA Funnel Herb Spice Grinder Plastic 4 Inch (Yellow)
Thunderbolt Gunworks 101st Airborne Patch Laser Etched Hat Clip

Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta

Anbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta:whilst also offering the best possible advice through our specialist trained sales team who collectively have over 100 years experience. I ran this 22l through the wringer and it came out still cleaning and heating. I had the intention of running this thing violently til it broke, burned up, stopped working, died, destroyed, worst case scenario or any other thing the negative reviews had to say. The parts were dirty, greasy, oily, full of rust and heavy cruddy deposits for just a run through hell. I've run the ultrasonic powder from Harbor Freight, a phosphoric acid, sulfuric acid, the gallon of POR-15 Rust Remover (diluted 2:1), muriatic acid, metal etching acid, heated distilled water with Power Purple and just about everything else you're not supposed to use in it. What I cleaned: 4 dirtbikes were taken apart, engine cases, cylinder, cylinder heads, caked with dirt, rusted bolts/nuts, bearings of every type (wheel, full swingarm 1/2 at a time, swingarm linkage, etc) F/R brake calipers, rear shocks, cables, clutch baskets, carburetors, triple trees. Garden tractor parts: carbs, calipers, cylinders, heads, valves, springs, keepers, pushrods, rockers, crankshafts, cams, spindles, cutting blades (Caked with heavy grass), pulleys, springs, Three K51-K66 transmission case halves Six total, axles, hubs, front steering spindles (full grease covered) and connecting linkages..... The list goes on, if it fit it went in. The keys to keeping it working well is keep it 2/3rd full, when you remove the top have a rag to wipe the rim because the heater will create condensation/steam droplets and they will run down the side, if not used for more than a few days have a container to remove cleaner fluid from tank.I cleaned the tank/machine after changing chemicals, the worst was the dirt bikes, the dirt and grease was 3/4" sludge on the bottom clogging the drain hole so I had to scoop it out and then rinse with hot water and Dawn dishsoap. Even with all that crud on the bottom parts still came out clean but had to be rinsed with the hose of the dirty water.max 87% off,max 88% off,new york mallAnbull 6.5L Professional Ultrasonic Cleaner Machine with 304 Sta