ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely

ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely

$11

ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely

ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely:whilst also offering the best possible advice through our specialist trained sales team who collectively have over 100 years experience. I bought a pair of these because I was after something to replace a Fiskar 9485. The Fiskar didn't wear out or break, I just wanted a pair. One of the technicians I worked with commented that he wished the Fiskars were still available, but they'd been discontinued. There was an electrical project that involved cutting some 0.032" copper sheet and he found out he could make some of the shorter cuts with the Fiskar shears. I thought this would be a good 'acid test' for these cutters. Unfortunately, while the Fiskar's survived unscathed, the same can't be said for the Ares 70105's. It was noticeably tougher to cut using the Ares shears and there was some small damage to the shears too. The serrated edge is now noticeably duller and the opposite edge had some small nicks (from copper!). I removed the nicks with a diamond hone and purposefully made the angle less acute. The new angle should make repeating this same issue less likely. The result was excellent as demonstrated by easily cutting tissue paper without sangs. However, this all indicates that the cutting edge isn't as tough as it could be, like in the Fiskar 9485's.Overall this is a good enough shear for light duty work, but there are better ones out there. They cost more too.ranking top11,free,sacramento mallARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely
|||

Product Description

Constructed of High Carbon Stainless Steel, our 5-1/2" Shears are capable of cutting a variety of materials including soft cable up to 22mm² in diameter. The ergonomic lightweight handles designed for both left and right handed use. These shears are perfect for electrical work and many other tasks that require sharp blades and precision cuts.

Professional Ratcheting Wire Terminal Crimper Tool Automatic Wire Stripper and Cutter 7-Piece Electrical Screwdriver Set 5 1/2-Inch Multi-Purpose Heavy Duty Shears 8-Inch Self-Adjusting Wire Stripping Tool and Cutter with Crimper Compact Modular Crimper
Professional Ratcheting Wire Terminal Crimper Tool Automatic Wire Stripper and Cutter 7-Piece Electrical Screwdriver Set 5 1/2-Inch Multi-Purpose Heavy Duty Shears 8-Inch Self-Adjusting Wire Stripping Tool and Cutter with Crimper Compact Modular Crimper
Specifications Works with 10-22 gauge wire and has color-coded sizing for easy use Stripper jaws automatically self adjust to enable the user to strip 10-24 AWG gauge wire; built in cutter cuts up 12 AWG wire Includes #0, #1, and #2 Phillips drivers and 0.4 x 2.5 x 75, 0.8 x 4.0 x 100, 1.0 x 5.5 x 125 and 1.2 x 6.5 x 150 Slotted drivers Cuts soft cable up to 22 square mm, insulation materials, electrical tape, and many other materials Self-adjusting jaws firmly grab wire and cable from 10-24AWG; micro adjusting swivel knob strips wire smaller than 26 AWG; crimps 10-22AWG insulated, 10-22AWG non-insulated, and 7-8mm ignition terminals Cuts, crimps and strips data or voice cables, including: CAT6, CAT5e, CAT3 and flat-satin; crimps 6 and 8 position modular connectors RJ11, RJ12, and RJ45
Quality Captures and restrains the sides of the terminal and crimps the top and bottom, ensuring crimps consistently make a cold weld between the wire and barrel of the connector Automatically grips and strips wire with a simple squeezing motion; Constructed from high strength Chrome Moly Steel with strong magnetic tips for superior screw retention High Carbon Stainless Steel cutting blades feature fine serration along the edges of the blades to prevent slippage, a wire cutting notch for shearing wire on the go, and adjustable tension Jaws automatically adjust to wire size, grip insulation, cut just down to the wire, and then remove the insulation in one smooth motion Handle locks down so you can effectively use the stripper, as well as tighten down your fittings, without ever nicking the internal wiring or over-compressing
Features Ratcheting action requires only a fraction of the strength and effort it takes to use a non-ratcheting crimper; adjustable tension and ergonomic handles reduce hand fatigue and stress Ergonomic handles prevent hand fatigue during prolonged use; sleek, low profile design for access to hard to reach areas High visibility red insulated shafts with ergonomic handles for maximum comfort and superior torque and leverage Ergonomic lightweight handles designed for both left and right handed use and large enough to easily accommodate work gloves Included wire cutter adds even more functionality and versatility Compact design is easy to handle, allowing for an ergonomic grip and comfortable compressing action; connector wiring diagram on the side of the tool makes it easy to remember wiring order
Condor Tool Knife, Desert Romper KnifeFlyHero Column Concrete Plaster Cement Casting Railing Moulds BaDorman 800-605 Automatic Transmission Line ConnectorWARMQ Car Ceiling Net Storage, 31"x23" Double-Layer Interior Roo2XU Women's Performance Cycle JerseyBluBird 18ga. Heavy Duty Retractable Air Hose Reel - Next-Gen RuMercedes-Benz A/C Cabin Dust FIlter Charcoal Carbon Genuine Orig2315539 WP2315539 Refrigerator Evaporator Fan Motor By Appliance
Aori Lifelike Reborn Baby Dolls 22 Inch Real Life Baby Boy That
ROCKBROS Mountain Bike Gloves Dirt Bike Gloves Motorcycle Cyclin
GEARWRENCH 12 Pt. XL X-Beam Ratcheting Combination Wrench, 11mm
Fits 93-95 Jeep Grand Cherokee Header Panel Grille Headlight Sig
AKRacing Core Series EX SE Gaming Chair - Fabric with PU Accents
United Scientific Supplies GBT001 Tubing Assortment, 12" Length,
BRABIC Maternity Nursing Tank Tops for Women Breastfeeding Shirt
Endurance Pro WR60X10141 Evaporator Fan Motor Replacement For GE
uxcell Universal Motorcycle Fuel Switch Scooter Petrol Gas TankToddler Back to The Future Doc Brown CostumeShoulder Holster Taurus Millenium G2 PT111, PT140 with UnderbarrGold Silverware Set with Red handle,DILUOOU 20 Piece Stainless SWINSOON Decorative Magnetic Garage Door Window Panels Vinyl ThicSealed Power SEARP3093-8 Pushrodmaxin Ultra Bright Camping Lantern with Rechargeable Batteries,DD PowerDrive 532140218 Panzer Machinery Kevlar Replacement Bel
Namura, NA-30002CG, Clutch Cover Gasket Suzuki Quadsport 400 LT-
Proform 66983R Vacuum Advance HEI Distributor with Steel Gear an
Cuisinart WAF-150 4-Slice Belgian Maker Waffle Iron, Single, Sil
Ornament Hanging Hooks in Gold, Silver Green (125pc Each) - Mi
Mega Contrux Black Series Splinter Cell Blacklist Sam Fisher
Patriot Exhaust H8036-1 1 1/2" Clippster Exhaust Header for Smal
Vitamin D3 50,000 IU Units for Bones Teeth Muscles and Immune Sy
Industrial Endoscope Accessories, Magnet Hook Side Mirror for 8m

ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely

ARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely:whilst also offering the best possible advice through our specialist trained sales team who collectively have over 100 years experience. I bought a pair of these because I was after something to replace a Fiskar 9485. The Fiskar didn't wear out or break, I just wanted a pair. One of the technicians I worked with commented that he wished the Fiskars were still available, but they'd been discontinued. There was an electrical project that involved cutting some 0.032" copper sheet and he found out he could make some of the shorter cuts with the Fiskar shears. I thought this would be a good 'acid test' for these cutters. Unfortunately, while the Fiskar's survived unscathed, the same can't be said for the Ares 70105's. It was noticeably tougher to cut using the Ares shears and there was some small damage to the shears too. The serrated edge is now noticeably duller and the opposite edge had some small nicks (from copper!). I removed the nicks with a diamond hone and purposefully made the angle less acute. The new angle should make repeating this same issue less likely. The result was excellent as demonstrated by easily cutting tissue paper without sangs. However, this all indicates that the cutting edge isn't as tough as it could be, like in the Fiskar 9485's.Overall this is a good enough shear for light duty work, but there are better ones out there. They cost more too.ranking top11,free,sacramento mallARES 70105 - 5 1/2-Inch Multi-Purpose Heavy Duty Shears - Finely